Serving Since 1958

Understand your auto batteries before they become a problem

Our Digital Battery Analyzers are an important part of your Battery Management Program.  In just seconds, they measure the Volts and Amps of your battery to get a thorough and complete reading on the condition of your battery so you can effectively decide if the battery is fully recovered, discharged or needs replacement.  These analyzers are a simple, inexpensive solution to a complicated, very expensive problem – vehicle and equipment readiness!

The 777P-PT Battery and System Tester tests both 6-Volt and 12-Volt lead-acid batteries (VRLA, AGM and flooded cell) as well as 12-Volt and 24-Volt starting/charging systems fast, safely and simply. The single load, dynamic resistance testing technology ensures your vehicle or equipment readiness. The backlit display is easy to read in any light and you can print your test results for easy record keeping. The unit is housed in rugged over molded rubber and comes with high impact molded carry case.

Features:

  • Tests 12V & 24V starting/charging systems
  • Uses patented single-load, dynamic resistance technology
  • Displays battery voltage & cold cranking amps
  • Easy to use intuitive screen prompts
  • Tests discharged batteries down to 1.5-Volt
  • Includes built-in thermal printer with date/time function
  • Generates a warranty code with each test for  tracking purposes
  • Comes with an industrial carrying case

 

The 390PT Battery and System Tester lets you quickly, safely and accurately test both 6-Volt and 12-Volt lead-acid flooded, AGM (flat and spiral plate) and gel cell batteries in or out of the vehicle and test 12-Volt and 24-Volt charging systems for proper operation. Combined singe load, dynamic resistance technology and algorithms display battery voltage and capacity in easy to understand results in seconds. The handy “QUICK START” instruction guide is printed on the back of the tester.

Features:

  • Tests VRLA, AGM, gel and flooded cell 12V & 6V lead-acid batteries
  • Tests batteries in or out of the vehicle
  • Displays if battery is good or needs replacement
  • Shows condition of battery in percentage of state of health and state of charge
  • Tests alternator, starter voltage and diode ripple if the battery is installed in a vehicle
  • Handy quick start instruction guide printed on the back
  • Rugged shock resistant rubber case
  • Selectable 7 language display

 

For more information on PulseTech Products, contact Industrial Finishes  by phone at 800.531.1305 or by visiting your nearest Industrial Finishes Location.

777PT Specifications
Electrical Characteristics
Rating System: SAE, DIN, EN, IEC, JIS Battery No.
Operation Range: 40 to 2000 CCA (SAE)
Minimum Battery Voltage for  Analysis: 1.5V
Voltmeter Range: 1.5V to 30V
Internal Batteries: Six 1.5V AA Batteries
Mechanical / Physical Characteristics
Dimensions: 9.9” L x 5.1” W x 2.5” H
Unit Weight: 2.15 lbs.,
Shipping Weight: 7.85 lbs.
Battery Cable Length: 3.9’

390PT Specifications
Electrical Characteristics
Rating System: SAE, DIN, EN, IEC, JIS Battery No.
Operation Range: 40 to 2000 CCA (SAE)
Minimum Battery Voltage for Analysis: 1.5V
Voltmeter Range: 1.5V to 30V
Internal Batteries: 1 Each 9 Volt
Mechanical / Physical Characteristics
Dimensions: 7.8” L x 4.5” W x 2.1”
Unit Weight: 1.40 lbs., Shipping Weight: 1.78 lbs.
Battery Cable Length: 2.62’