Lord Fusor® has just released two new and improved formulas for two quality products. The first improvement is for their Direct-to-Metal Adhesive and Sealant product, and the other is for their line of High Definition Seam Sealers.
Fusor® Direct-to-Metal Adhesive/Sealant (800 & 803DTM)
Features & Benefits:
- Extended shelf life
- Single component direct-to-metal
- Skins in 15-45 minutes
- Paint immediately or up to 30 days
- Reduces cycle time
- Non-sag
- Easy to tool
- Holds brush marks without die back
- Duplicates all types of OEM seams
- Easy to dispense
- Weld-through with no burn back
- Provides excellent resistance to UV exposure
*Available in Black and Neutral
Technical Data
Skin Time 15-45 minutes @ 70˚F (21˚C), 50% RH
Paint Time Immediately or up to 30 days without a scuff
Full Cure 72 hours @70º (21ºC)
Elongation 400%
Lap Shear Strength
Steel to Steel 382 psi (2.63 MPa)
Fusor® High Definition Seam Sealers (802, 804, 805, & 806HD)
Features and Benefits:
- High Definition Appearance –easily duplicates factory-applied textured seams; provides extremely flexible, non-yellowing seal with no shrinkage, cracking or sagging.
- High Performance–provides excellent adhesion to bare or primed surfaces.
- Versatile–adheres to bare metal or primed surfaces; can be used for duplicating OEM spray-applied seam sealers and surface coatings.
- Environmentally Resistant—provides excellent UV resistance and corrosion protection.
- Easy to Finish—can be tooled, wiped clean, sanded and/or painted; offers immediate paint time; tools easily without solvents.
- Environmentally Recommended—contains low VOCs and no solvents or isocyanates.
- Extended Shelf Life—offers longer shelf life, reducing inventory costs.
- Firm Texture—improved, tougher texture, will not imprint.
**Recommended by GM, Ford and Chrysler
Technical Data
Skin Time 15-45 minutes @ 70˚F (21˚C), 50% RH
Paint Time Immediately or up to 30 days without a scuff
Elongation 200%
Corrosion Control 60 cycles, SAE J2334 1000 hours, ASTM B117 Salt Spray
For more information on Lord Fusor® or any other Lord Fusor® products, contact Industrial Finishes by phone, 800.531.1305, or email info@industrialfinishes.com.